£11.00
£13.20 inc. VAT
Milwaukee Diamond Plus Holesaw Grinder Adaptor 22-29 mm
Fits holesaws 22-29 mm
How to use on an angle grinder:
- Screw the grinder adaptor M14 to the holesaw and tighten firmly with a spanner. Then apply the spindle lock on the angle grinder and fit the adaptor directly onto the spindle, tighten firmly with a spanner
- If the tile is not fitted to a wall or floor ensure it is secured firmly with a clamp
- Dip the holesaw tips into water
- Switch on angle grinder to full speed. Slowly approach the tile with the holesaw at a 20-30° angle with light pressure to avoid skating on the tile. Once the holesaw starts to cut into the tile and forms a groove, gradually raise the holesaw so that it is horizontal with the tile
- Every 5 seconds dip the holesaw in water
- Apply light pressure and an oscillating circular motion during cutting to maximise tool life
Product Code: MIL-4932430464
