Milwaukee Diamond Plus Holesaw Grinder Adaptor 32-68 mm
£13.00
£15.60 inc. VAT
Milwaukee Diamond Plus Holesaw Grinder Adaptor 32-68 mm
Fits holesaws 32-68 mm
How to use on an angle grinder:
Screw the grinder adaptor M14 to the holesaw and tighten firmly with a spanner. Then apply the spindle lock on the angle grinder and fit the adaptor directly onto the spindle, tighten firmly with a spanner
If the tile is not fitted to a wall or floor ensure it is secured firmly with a clamp
Dip the holesaw tips into water
More Info
Switch on angle grinder to full speed. Slowly approach the tile with the holesaw at a 20-30° angle with light pressure to avoid skating on the tile. Once the holesaw starts to cut into the tile and forms a groove, gradually raise the holesaw so that it is horizontal with the tile
Every 5 seconds dip the holesaw in water
Apply light pressure and an oscillating circular motion during cutting to maximise tool life